<nav id="6zyku"></nav>
<thead id="6zyku"></thead>
<code id="6zyku"><nobr id="6zyku"></nobr></code>

<blockquote id="6zyku"><em id="6zyku"></em></blockquote>

<center id="6zyku"></center>
<nav id="6zyku"><video id="6zyku"><acronym id="6zyku"></acronym></video></nav>
  • <object id="6zyku"></object>

     

    客服中心
    熱線電話
    0755-88299956
    上班時間
    周一到周五
    E-mail地址
    info@topquality.cn
    二維碼
    圖片展示
    產品中心

    聯系我們

    服務熱線

    0755-88299956

     

    電話:0755-88299956
    傳真:0755-88299954
    信息咨詢:info@topquality.cn
    購買儀器:sales@topquality.cn
    技術:support@topquality.cn

    招騁:master@topquality.cn

    NNHV 8123

    主要特點
    HV-LISN acc. to CISPR 25 Ed. 4 or BMW GS 95025-1

    附件下載

    技術參數

     型號

    描述

    NNHV 8123

    High Voltage LISN acc. to CISPR 25 Ed. 4 or BMW GS 95025-1 to measure the conducted disturbance voltage on shielded lines for (hybrid) electric vehicles (HEV, EV), can be used for BCI with an external dummy load,

    impedance (5μH) || 50 Ohm. 70 (100) A, 1000 V DC. Backside with built in

    0.1 microfarad capacitor to ground, N-jack. Normally used in pairs inside the enclosure HVSE 8600!

    NNHV 8123-200

    High Voltage LISN acc. to CISPR 25 Ed. 4 or BMW GS 95025-1 to measure the conducted disturbance voltage on shielded lines for (hybrid) electric vehicles (HEV, EV), can be used for BCI with an external dummy load,

    impedance (5μH) || 50 Ohm. 200 A, 1000 V DC. Backside with built in

    0.1 microfarad capacitor to ground, N-jack. Normally used in pairs inside the enclosure HVSE 8600!

    NNHV 8123-400

    High Voltage LISN acc. to CISPR 25 Ed. 4 or BMW GS 95025-1 to measure the conducted disturbance voltage on shielded lines for (hybrid) electric vehicles (HEV, EV), can be used for BCI with an external dummy load,

    impedance (5μH) || 50 Ohm. 400 A, 1000 V DC. Backside with built in

    0.1 microfarad capacitor to ground, N-jack. Normally used in pairs inside the enclosure HVSE 8600!

    NNHV 8123-800

    High Voltage LISN acc. to CISPR 25 Ed. 4 or BMW GS 95025-1 to measure the conducted disturbance voltage on shielded lines for (hybrid) electric vehicles

    (HEV, EV), can be used for BCI with an external dummy load, impedance (5μH)||50 Ohm. 800 A, 1000 V DC. Backside with built in

    0.1 microfarad capacitor to ground and suitable discharge resistor, N-jack. To be used in pairs inside a shielded enclosure HVSE 8601!

    HVSE 8600

    Shielded housing for 2 HV-LISN, 2 paths with cable feed throughs for HV+ and HV-, shield can be connected to the housing, 2 measurement ports N, 1 monitor port N, with connecting cables between inside measurement ports and outside N-connectors. All models of the NNHV- and NNBM-series can be inserted. For full CISPR 25 Ed. 4 compliance a modification of the back side circuitry of the NNBM series is required!

    Opt. 8600-blanco

    1 pair of flange panels for HVSE 8600. Mains side with no connector or feed through. DuT side with only 2 x N-feed throughs for AUX and 2 x N feedthroughs for RF-HV+ and RF- HV-. Feed throughs for HV+ and HV- must be drilled and assembled by customer.

    Opt. 8600-100

    1 pair of flange panels for HVSE 8600 with cable feed throughs for shielded cables up to ca. 100 A.

    Opt. 8600-200

    1 pair of flange panels for HVSE 8600 with cable feed throughs for shielded cables suitable for max. currents in a range of ca. 100 A to 200 A.

    Opt. 8600-400

    1 pair of flange panels for HVSE 8600 with cable feed throughs for shielded cables suitable for a range of ca. 200 A to 400 A.

    HVSE 8601

    Shielded housing for 2 units of HV-LISN NNHV 8123-800, with cable feed throughs for HV, shield can be connected to the housing, 2 measurement ports N, 2 monitor ports N, with connecting cables between inside measurement ports and outside N-connectors.

    Opt. 8601-800

    1 pair of flange panels for HVSE 8601 with cable feed throughs for shielded cables suitable for a range of ca. 400 A to 800 A.


    HV-LISN acc. to ECE R10.06, CISPR 12 and PSA-1

    NNHV 8123-400R

    High Voltage LISN acc. to CISPR 25 Ed. 4 or BMW GS 95025-1 with C2=0.1 microfarad switchable to ECE R10 with C2=1.0 microfarad to measure the con- ducted disturbance voltage on shielded lines for (hybrid) electric vehicles (HEV, EV), can be used for BCI with an external dummy load, impedance (5μH) || 50 Ohm. 400 A, 1000 V DC. Backside with built in 0.1/1.0 microfarad capacitor switchable, N-jack. Normally used in pairs inside the enclosure HVSE 8600!

    CAP 0.9-400

    0.9 microfarad capacitor built into an adapter, which can be applied to the mains terminals of the NNHV 8123-800 or NNHV 8123-400 for the standards ECE R10.06, CISPR 12 and PSA 9829, 9831


    NNHV 8123
    主要特點
    HV-LISN acc. to CISPR 25 Ed. 4 or BMW GS 95025-1
    長按識別二維碼查看詳情
    長按圖片保存/分享
    詢盤

    在線詢盤 更多+
    • 聯系人 *

    • 手機 *

    • 描述

    • 提交

    • 驗證碼
      看不清?換一張
      取消
      確定

    咨詢內容:


    你還沒有添加任何產品

    加入成功
    詢盤

    在線詢盤 更多+
    • 聯系人 *

    • 手機 *

    • 描述

    • 提交

    • 驗證碼
      看不清?換一張
      取消
      確定

    咨詢內容:


    你還沒有添加任何產品

    加入成功

    走進我們

     

    公司介紹

     

    新聞動態

     

    客戶案例

    公司新聞

     

     

    聯系我們

     

    聯系方式

     

    深圳市拓科銳科技有限公司    Copyright 2022   

    添加微信好友,詳細了解產品
    使用企業微信
    “掃一掃”加入群聊
    復制成功
    添加微信好友,詳細了解產品
    我知道了
    AV天堂婷婷综合免费网,996久久国产精品线观看,性欧美大战久久久久久久,国产成人精品第一区二区三区